Arizer Extreme Q Vaporiser

The Arizer Extreme Q is a high-performance desktop vaporizer designed for serious dry herb sessions. With its ceramic convection heater, digital temperature control, and dual delivery options (whip or balloon bag), it delivers smooth, flavour-rich vapor in both solo and group settings. Featuring a full glass vapour path, quiet fan system, and remote control operation, the Extreme Q brings precision, versatility and reliability to the desktop category.

Included in the box:

• 1 × Extreme Q Multi-Purpose Heater
  
• 1 × Power Adapter (AX110-240 V / DC19 V)
  
• 1 × Remote Control
  
• 1 × Glass Cyclone Bowl™
  
• 1 × Glass Aromatherapy Dish
  
• 1 × 3′ Silicone Whip
  
• 1 × Glass Mini Whip
  
• 1 × Interchangeable Glass Whip Mouthpiece
  
• 1 × Assembled Balloon (bag with glass balloon mouthpiece)
  
• 1 × Glass Stirring Tool
  
• 1 × Spare Screen Pack
  
• 1 × Sample Aromatic Botanicals
  
• 1 × Owner’s Manual
  

How to use it:

1. Plug in the heater and power on the unit.
   
2. Load ground dry herb into the Cyclone Bowl or use the aromatherapy dish.
   
3. Choose your preferred delivery mode: connect the balloon for bag fills or attach the whip for direct draw.
   
4. Use the remote or the heater controls to set your desired temperature and fan speed.
   
5. Once heated, inhale slowly—either from the balloon or via the whip—for smooth, flavourful vapour.
   
6. After your session, empty the herb chamber, clean glass components regularly, and store the unit unplugged in a safe place.

The Arizer Extreme Q is designed for use with dry herb and is optimized for herb vaporization.

The Arizer Extreme Q is mains-powered only — it needs to be plugged into an AC outlet (110-240 V) to operate..

Using the Arizer Extreme Q is straightforward:

1. Plug in the unit and switch it on.
   
2. Choose your attachment — either the whip for direct draw or the balloon for vapour storage.
   
3. Grind your dry herb and place it into the glass Cyclone Bowl.
   
4. Set your temperature using the digital controls or the remote.
   
5. Allow it to preheat for a few minutes until it reaches your chosen temperature.
   
6. Activate the fan (for balloon use) or inhale through the whip when ready.
   
7. Empty and clean the bowl and glass parts after each session for best performance.
   

The Extreme Q delivers consistent vapour quality whether you prefer fast, dense clouds or slow, flavourful draws.

You can set the temperature on the Arizer Extreme Q anywhere between 50 °C and 260 °C (122 °F and 500 °F). The unit allows fine-tuning in 1-degree increments for precise control.

Yes — the Arizer Extreme Q is compatible with other Arizer glass accessories. Many of Arizer’s standard glass parts, such as the Glass Connoisseur Bowl, Glass Cyclone Bowl, and Whip Tubing, can be interchanged between the Extreme Q, V-Tower, and XQ2. This makes it easy to replace or upgrade parts without needing entirely new components.

To clean the Arizer Extreme Q, follow these simple steps to keep it performing at its best:

1. Unplug and cool down – Always make sure the vaporizer is unplugged and completely cool before cleaning.
   
2. Disassemble the glass parts – Remove the Cyclone Bowl, elbow adapter, and any whip or balloon attachments.
   
3. Soak glass components – Place the glass pieces in isopropyl alcohol (91% or higher) for about 30 minutes to dissolve residue. Rinse thoroughly with warm water and allow to dry fully.
   
4. Clean screens – Replace dirty screens when needed, or soak and rinse them in alcohol as well.
   
5. Wipe the exterior – Use a soft, damp cloth to wipe the main unit. Avoid getting moisture inside the device.
   
6. Reassemble carefully – Once all parts are dry, reattach them securely and you’re ready to go.
   

Tip: Regular cleaning after every few sessions keeps airflow smooth, maintains flavour quality, and extends the life of your vaporizer.

ChatGPT said:

Here’s the warranty information for the Arizer Extreme Q without any links:

• Lifetime warranty on the ceramic heating element.
  
• Limited 3-year warranty covering defects in materials and workmanship (glass parts not covered).